• Pro-Seal
• Honda CR & CRF Pro-Seal Air Box Kits
• Plastic Renew
• Filterskins
• Fork Support
• Carburetor Vent System
  
  

Pro-Seal

Tired of the hassle and mess of air filter grease? Pro-Seal is the answer for a perfect filter to air box seal without the use of messy grease. This neoprene gasket adheres to the air filters rim (**some applications do not have a rim) inside the motorcycle's air box. The neoprene material creates a larger sealing surface and has memory for a perfect seal time after time. Due to adhesives that are not affected by gas and oils the Pro-Seal will not separate from the air filter rim once installed.

Order No.	Application
945-041	CR125/500 (89-01), CR250 88-01, KX125/250 (90-91, 94-02), KTM250/300 (90-97), KTM360 (96-97)
945-042	XR250R (86-02), XR250L (91-97), XR350R (83-85), XR400R (96-02), XR600R (85-02), XR650L (93-02), CRM250 (89-93)
945-043	YZ125/250 (93-02), YZF250 (01-02), YZF400/426 (98-02), WR250 (96-97), WR400 (98-99)
945-044	RM125/250 (96-02)
945-045	KTM 125/200/250/300/380/400/520 (98-02)
945-046	KX65 (00-02), KX80/85 (91-02), KX100 (95-02), YZ80/85 (93-02)
945-049	KX125/250 (87-89), KX500 (87-02), KDX200 (89-02), KDX220 (97-02), KDX250 (91-94), KLX250R (94-96), KLX300R (97-02), KLX650 (93-97) KTM /620 (93-01), Suzuki DRZ400 (00-02), RMX 250 (96-02)

Honda CR & CRF Pro-Seal Air Box Kits

In addition to filling the gap between the air filter and air box, this special 02 CR & CRF Pro-Seal is cut around and the same height as the nipples inside the air box. This creates a perfectly flat sealing surface for the air filter. This flat sealing surface eliminates the tendency that the nipples have of pulling the filter away from the cage when the filter is tightened.

Using silicone or another type of sealant or glue on the stock part will only seal temporally, if at all. The stock plate is so flimsy, that as you ride, the air boot and plate flex and distort breaking the seal.

The Air Boot Gasket is waterproof and has memory, so it will have the same perfect seal if you take your air box apart again.

The Air Boot Plate will not flex or distort and in conjunction with the Air Boot Gasket creates a perfect seal for the lifetime of your motorcycle!

Kit Includes: * 1/4" thick neoprene Pro-Seal Air Filter Gasket (1) * 1/8" thick -6061 T6 Red Anodized Air Boot Plate (1) * 1/8" thick neoprene Air Boot Gasket (1) * Longer Air Boot Screws	Order No. Application 945-060 2002 CR125 & 250 945-061 2002 CRF450

Plastic Renew (Order No. 945-090)

Plastic Renew is a complete plastic restoring kit. 3 to 4 coats of Plastic Renew brings out the brilliant color and shine of new plastic. With Plastic Renew you don't have to worry about building up or discoloring. This product will not come off from normal washing. If your plastic gets scratched again, just follow the same procedure to restore that like-new shine. Typical motorcycle restoration will only require about one-quarter and ATV about one-half the chemical in this kit.
* Motorcycle and ATV plastic restoring kit
* Gives your bike that showroom shine
* Restores at least four complete bikes or two ATV's
* Works on any color
* Sandpaper included



Filterskins

Filterskins are an extremely thin but durable air filter cover. While allowing maximum airflow, an oiled Filterskin will catch 90% of the dirt that tries to pass through the air filter. Between races or between rides, simply pulling off a dirty Filterskin and sliding on a clean one can save you time and actually save money on expensive solvents and oils. Filterskins are extremely elastic and each size will expand over a wide range of air filter sizes.

Order No.	Diameter	Length	Common Applications
945-030	3"-4"	3"-4"	Small & short filters/short "clamp on" & "pod"/KX60
945-032	3"-5"	5"-8"	Small & tall filters/ Tall "clamp on" & "pod"/Yam Banshee & Warrior/Hon Fourtrax & Pilot
945-034	5"-6"	2"-5"	Hon XRs and ATCs/ Hon, Yam, Suz 80cc Mxers/ Kaw KLR/ Yam Blaster & Breeze/Suz DRs & 200-250 Quads
945-036	6"-8"	4"-7"	Full size CR, KX, KDX, KLX, RM, RMX, DRZ, YZ, WR, KTM/ '91+ KX80/KX65/ Suz LT 500 Quad
945-038	Quick Release		Same applications as part 945-036

Fork Support (Order No. 945-095)

* Sized to fit 80cc up to the big bores
* Stabilizes bike during transportation
* Keeps bike strapped down tight without damaging fork seals
* Bikes won't bounce off tiedowns, preventing damage to motorcycle or vehicle
* Fits all bikes with 11 inches or more of travel
* Polycarbonate injected molded plastic
* Lifetime warranty on fork support - against breaking



Carburetor Vent System for Motorcycles & ATVs

	Order No. Color Application Carburetor Vent System 2 945-003 Black All single carbureted 2 and 4 stroke motorcycles, ATV's, Karts, and snowmobiles with motorcycle style carburetors. (One size fits all) Carburetor Vent System 3 945-010 Blue All dual carbureted 2 and 4 stroke motorcycles and ATV's (Targeted to the Yamaha Banshee)
* Prevents bogging * Washable filter * Prevents flodding * Fits all carburetors * Velcro-mounted vent box * Step by step instructions included

Go back to top